home / products / water pipes

PE100 RC Pipe Type 1

Black Solid wall pipes in high density polyethylene PE100RC TYPE 1 – resistance to crack – with blue external wall and black internal wall. This material has a high resistance to shock. Used for pressurized water networks, (e.g. pressurized potable water, raw water prior to treatment, liquids for human consumption, aquaculture etc.).

Technical specification

High density polyethylene pipes in PE100RC type 1, with a very high shock resistance (values of S.C.G – Slow Crack Growth greater than 8.760 hours),  totally black or with blue or brown coextruded stripes. Used for water networks under pressure (e.g. pressurized potable water, raw water prior to treatment, liquids for human consumption, aquaculture etc.).
In accordance with UNI EN 12201-2 and with national regulations in terms of health and sanitation concerning the transport of liquids for human consumption (Ministerial Decree No 174 of April the 6th 2004) with organoleptic properties. It is recommended in unstable soils with an excellent corrosion resistance in aggressive soils and in the presence of stray currents. Suitable for installation through “trenchless” technique (similar to poses “without sand embedding”) in compliance with PAS 1075 Type 1 or Type 2 and with the DVGW GW323 specifications. RC pipes are produced with PE100 with high SCG resistance checked through various tests, among which FNCT (Full Notch Creep Test) and PLT (Point Loading Test) that determine a resistance value ≥ to 100 years to severe damage, either real or under point load test conditions.

SPECIFICATIONS

Black Solid wall pipes in high density polyethylene PE100RC TYPE 1 – resistance to crack – with coextruded blue stripes or totally black. This material has a high resistance to shock. It is used for the supply of pressurized water networks, (e.g. pressurized potable water, raw water prior to treatment, liquids for human consumption, aquaculture etc.). 

In accordance with :

  • EN12201-2 standard
  • National regulations in terms of health and sanitation concerning the transport of liquids for human consumption (Ministerial Decree No 174 of April the 6th 2004). 
  • UNI EN ISO 9001: 2008 for quality
  • UNI EN ISO 14001: 2004 for environnement
  • EN1622 standard for organoleptic properties 

Complying with : 

  • DIN / PAS1075 type 1 or type 2 certificate 
  • DWGV GW323 certificate specifications

dddf

PEAD SN2/4/8

CAVIDOTTO

HDPE Pipe for cable protection

IRRIGAZIONE

PE 80 for irrigation – Bobine

GASDOTTI

PE100 Pipe for gas fuels